ABSTRACT:
The manuscript presented the successfully synthesis of Zn-Fe alloy thin film deposition in sulfate bath on mild steel substrate. The hexadanted ligand EDTA was incorporated in alloy solution as corrosion inhibitor. All depositions were conducted at constant current density 2 mA/cm2 for 40 min. The morphological characterization of the thin film was analyzed with X-ray diffraction analysis (XRD) and Confocal laser microscopy. The Tafel polarization experiment was performed to determine the anticorrosion behavior of thin film in 3.5% NaCl and 0.1 M HCl solutions. The corresponding maximum corrosion efficiency of reinforced EDTA alloy is 93.57 and 94.02% in 3.5% NaCl and 0.1 M HCl solutions respectively.
Cite this article:
R. K. Pathak, Mukta Rani Bhawsar. A. Chemistry Corrosion potential of reinforced EDTA Zn-Fe Alloy in Acidic and Basic medium. Asian Journal of Research in Chemistry 2023; 16(4):.285-0. doi: 10.52711/0974-4150.2023.00047
Cite(Electronic):
R. K. Pathak, Mukta Rani Bhawsar. A. Chemistry Corrosion potential of reinforced EDTA Zn-Fe Alloy in Acidic and Basic medium. Asian Journal of Research in Chemistry 2023; 16(4):.285-0. doi: 10.52711/0974-4150.2023.00047 Available on: https://www.ajrconline.org/AbstractView.aspx?PID=2023-16-4-6
REFERENCES:
1. S. Yogesha, H. Chitharanjan, A. Corrosion resistant Zn-Co alloy coatings deposited using saw-tooth current pulse. Bull Mater Sci., 2011, 34, pp. 1699–1706 https://doi.org/10.1007/s12034-011-0380-1
2. R. Bernasconi, G. Panzeri, G. Firtin, B. Kahyaoglu, L. Nobili,, L. Magagnin, Electrodeposition of ZnNi Alloys from Choline Chloride/Ethylene Glycol Deep Eutectic Solvent and Pure Ethylene Glycol for Corrosion Protection. The Journal of Physical Chemistry B., 2020, 124, 47, pp. 10739–10751 doi:10.1021/acs.jpcb.0c04784
3. M. Popczyk, J. Kubisztal, A. Swinarew, A. Szymon; K. WaÅ, S. Zbigniew, K. Arkadiusz, B. Knechtle, Beat, Corrosion Resistance of Heat-Treated Ni-W Alloy Coatings. Materials, 2020, 13(5), pp. 1172. doi:10.3390/ma13051172
4. B. Abedini, A. Parvini, Y. Naghi, M. Sasan, Luca, Electrodeposition and corrosion behavior of ZnâNiâMn alloy coatings deposited from alkaline solution. Transactions of Nonferrous Metals Society of China, 2020, 30(2), pp. 548–558. doi:10.1016/S1003-6326(20)65234-7
5. H.S. Lee, J.K. Singh, M.A. Ismail, Corrosion mechanism and kinetics of Al-Zn coating deposited by arc thermal spraying process in saline solution at prolong exposure periods. Sci Rep, 2019, 9, 3399. https://doi.org/10.1038/s41598-019-39943-3
6. F.T. Calkins and J. H. Mabe, (November 16, 2010). "Shape Memory Alloy Based Morphing Aerostructures." ASME. J. Mech. Des. November 2010, 132(11): pp. 111012. https://doi.org/10.1115/1.4001119
7. S. Bais, R. K. Pathak, Galvanostatic Electrodeposition and Corrosion Characterization of Ni-Co Alloy Thin Films, 2018, 8(5), pp. 792-799.
8. J. Lai, R. Luque, G. Xu, Recent Advances in the Synthesis and Electrocatalytic Applications of Platinum-Based Bimetallic Alloy Nanostructures. Chem Cat Chem, 2015, 7(20), pp. 3206–3228. doi:10.1002/cctc.201500471
9. Z. Erlin, Y. Lei, X. Jianwei, C. Haiyan, Microstructure, mechanical properties and bio-corrosion properties of Mg–Si(–Ca, Zn) alloy for biomedical application, 2010, 6(5), pp. 1756–1762. doi:10.1016/j.actbio.2009.11.024
10. N. Ryum, The influence of a precipitate-free zone on the mechanical properties of an Al-Mg-Zn alloy, 1968, 16(3), pp. 327–332. doi:10.1016/0001-6160(68)90018-7
11. J. Esquivel, R.K. Gupta, ReviewCorrosion-Resistant Metastable Al Alloys: An Overview of Corrosion Mechanisms. Journal of The Electrochemical Society, 2020, 167(8), pp. 081504–. doi:10.1149/1945-7111/ab8a97
12. N. Sridhar, R. Thodla, F. Gui, C. Feng, A. Liu, A. Andre, Corrosion-resistant alloy testing and selection for oil and gas production. Corrosion Engineering, Science and Technology, 2017, 53(S1), pp. 1–15. doi:10.1080/1478422x.2017.1384609
13. A. Cigada, M. Cabrini and P. Pedeferri, Increasing of the corrosion resistance of the Ti6Al4V alloy by high thickness anodic oxidation. J Mater Sci: Mater Med., 1992, 3, 408–412. https://doi.org/10.1007/BF00701236
14. J. Zhang, L. Zhang, ACS Applied Nano Materials, 2019, 2, 6368–6377.
15. I. H. Karahan,; H. S. Güder, Electrodeposition and properties of Zn, Zn–Ni, Zn–Fe and Zn–Fe–Ni alloys from acidic chloride–sulphate electrolytes. Transactions of the IMF, 2009, 87(3), 155–158. doi:10.1179/174591909x438875
16. H.K. Ismail, A study on electrodeposited Zn1−xFexalloys, 2007 42(24), 10160–10163. doi:10.1007/s10853-007-2116-6
17. I. H. Karahan, A study on electrodeposited Zn1−x Fe x alloys. Journal of Materials Science, 2007, 42(24), 10160–10163. doi:10.1007/s10853-007-2116-6